Toshiba AT300SE-B - Manual (Page 21)

2. Plug the other smaller connector of the USB cable into the Micro USB
port on your tablet.
Figure 3-4 Connecting the AC adaptor 2
3. Plug the AC adaptor into a live wall outlet.
Wall outlet
The fastest way to charge your tablet is with the included AC adaptor
plugged into a wall outlet.
USB charge
You can also charge your tablet, although more slowly, by connecting
the USB cable to the USB port on your PC. Please make sure your PC
is turned on while charging via USB. If your PC is turned off,
depending on PC specifications, the tablet’s battery may discharge.
We recommend that you do not use your tablet while charging via
USB as it may automatically shut down if the battery charge is too low.
Turning on the power
This section describes how to power up your tablet.
Press & hold Power button for two seconds and the LED indicator will glow
white for two seconds to indicate that the tablet is on.
Figure 3-5 Turn on the tablet
Initial Setup
The Setup Screen will be the first screen displayed when you turn on the
power. Setup your tablet according to the following steps:
1.
Choose your preferred system language and tap Start to start the
initial setup process.
2. Connect to a Wi-Fi network.
You can tap Skip and turn Wi-Fi on later in Settings app.
AT300SE series
User's Manual 3-8