Toshiba AT300SE-B - Manual (Page 19)

Connecting the AC adaptor
Turning on the power
Initial Setup
Turning off the power
Use a virus-check program and make sure it is updated regularly.
Never format storage media without checking its content - formatting
destroys all stored data.
It is a good idea to periodically backup internal storage of the tablet to
an external media. General storage media is not durable or stable
over long periods of time and under certain conditions may result in
data loss.
Connecting the AC adaptor
When battery power becomes low, you must charge it.
Use only the tablet connected to an AC power source to charge the battery.
Never attempt to charge the battery with any other charger.
The AC adaptor can automatically adjust to any voltage ranging from 100
to 240 volt and to a frequency of either 50 or 60 hertz, enabling you to use
this product in almost any country/region. The adaptor converts AC power
to DC power and reduces the voltage supplied to this tablet.
Figure 3-2 AC adaptor & USB cable
1
2
2-pin
3-pin
1. AC adaptor 2. USB cable
Depending on the model, either a 2-pin or 3-pin AC adaptor will be
bundled with the tablet.
The supplied USB cable conforms to safety rules and is designed to
provide adequate and steady power supply to the tablet. Please make
sure to use the supplied USB cable when you charge the tablet or
purchase an optional USB cable from TOSHIBA website.
Attach the AC adaptor when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because
AT300SE series
User's Manual 3-6