Toshiba Express Port Replicator - Manual (Page 30)

5-2 User’s Manual
Troubleshooting
AC power
If your computer is connected to the AC adaptor and you cannot turn on the
computer, check your computer’s DC IN 15V indicator.
Power switch
Overheating power down
If the computer’s internal temperature becomes too high, the computer will
automatically enter Resume mode and shut down.
Problem Procedure
AC adaptor doesn’t
power the computer
(Your computer’s DC IN
15V indicator does not
glow green)
Check the connections. Make sure the cord is
firmly connected to the computer and a power
outlet.
Check the condition of the cord and terminals.
If the cord is frayed or damaged, replace it. If the
terminals are soiled, wipe them with cotton or a
clean cloth.
If the AC adaptor still does not power the
computer, contact your dealer.
Problem Procedure
The computer does not
turn on when you press
the power switch
Connect the AC adaptor and try again to turn on
the computer.
If the computer still does not turn on, refer to the
sections Overheating power down and AC
power.
Problem Procedure
Computer enters
Resume mode and
shuts down
Leave the computer off until its interior reaches
room temperature.
If the computer has reached room temperature
and still does not start, or if it starts but shuts
down quickly, contact your dealer.
Computer shuts down
and its DC IN 15V
indicator is flashing
green
Indicates a problem with the heat dispersal
system. Please contact your dealer.
Aspen5.book Page 2 Tuesday, December 20, 2005 5:53 AM