Toshiba Express Port Replicator - Manual (Page 21)

User’s Manual 3-3
Connections
Connecting the AC adaptor
To supply AC power to the computer, connect the AC adaptor according to
the steps below.
1. Connect the power cord to the AC adaptor.
Figure 3-3 Connecting the power cord to the AC adaptor (2-pin plug)
Figure 3-4 Connecting the power cord to the AC adaptor (3-pin plug)
2. Connect the AC adaptor to the Port Replicator.
Figure 3-5 Connecting the AC adaptor
3. Connect the power plug to a wall outlet.
Only use the AC adapter supplied with this Port Replicator. Use of any
incompatible adaptor could damage your computer. TOSHIBA assumes no
liability for any damage caused by use of an incompatible adaptor.
The Universal AC Adaptor and power cord bundled with this product may
differ depending on the product model. Depending on the model, a 2-pin
plug or 3-pin plug set of the above may be bundled.
Aspen5.book Page 3 Tuesday, December 20, 2005 5:53 AM