Pioneer DDJ-SB - Manual (Page 8)

En 8
2 Rotary selector
Turn:
The cursor in the library, crates panel, etc., moves up or down.
Press:
When the cursor is positioned in the crates panel, moves the cursor
to the library.
The cursor moves between the crates panel and library each time the
rotary selector is pressed.
The cursor on the [Files] panel moves to a lower layer.
3 BACK (PANEL) button
Press:
When the cursor is positioned in the crates panel, either opens or
closes the sub crates.
When the cursor is positioned in the library, moves the cursor to the
crates panel.
The cursor on the [Files] panel moves to a higher layer.
[SHIFT] + press:
Serato DJ
The panel display switches in the order below each time the button
is pressed.
Panel display off
l [REC] panel l [FX] panel l [SP-6] panel l
Panel display off ...
Deck section
The deck section is used to control the two decks. There are controls and
buttons for operating deck 1 on the left side of the controller, controls
and buttons for operating deck 2 on the right side of the controller.
1 TEMPO
LEVEL
KEY
LOCK
VINYL
MIC
LEVEL
MIC
HOT CUE AUTO LOOP
CUE
SAMPLER
FWD REV
MANUAL LOOP
TEMPO
RANGE
SLIP
IN ROLL HOTLOOP BANK
SHIFT SYNC
OFF
OUT EXIT 1/2X
SELECT SELECT SELECT
BEATS
0
2 3
HOTCUE 5-8
1
2
3
4
5
a b c d
6 7 8
9
b c d a
1 TEMPO slider
Use this to adjust the track playing speed.
2 Jog dial
Turn top:
When the vinyl mode is on, the scratch operation is possible.
When the vinyl mode is off, the pitch bend operation (adjustment of
the playing speed) is possible.
Turn outer section:
The pitch bend operation (adjustment of the playing speed) is
possible.
[SHIFT] + Turn top:
When the jog dial is spun while pressing [SHIFT] button during
playback, the track is fast-forwarded/fast-reversed.
3 KEY LOCK (TEMPO RANGE) button
Press:
Turns the key lock function on and off.
When the key lock function is on, the key does not change even when
the playing speed is changed with the [TEMPO] slider.
! The sound is digitally processed, so the sound quality decreases.
[SHIFT] + press:
The [TEMPO] slider’s range of variation switches each time the but-
ton is pressed.
[±8%] [±16%] [±50%]
4 VINYL (SLIP) button
This switches the vinyl mode on/off.
[SHIFT] + press:
Serato DJ
Turns the slip mode on and off.
5 HOT CUE mode button
Press:
Sets the hot cue mode.
[SHIFT] + press:
Serato DJ
Sets the hot cue 5–8 mode.
6 AUTO LOOP mode button
Press:
Sets the auto loop mode.
[SHIFT] + press:
Serato DJ
Sets the roll mode.
7 MANUAL LOOP mode button
Press:
Sets the manual loop mode.
[SHIFT] + press:
Serato DJ
Sets the hot loop mode.
8 SAMPLER mode button
Press:
Sets the sampler mode.
[SHIFT] + press:
Serato DJ
Sets the bank mode.
9 Performance pads
a Performance pad 1
b Performance pad 2
c Performance pad 3
d Performance pad 4
Various performances can be achieved using the pads.
= Using the performance pads (p.14)
a f button
Press:
Use this to play/pause tracks.
b CUE ( ) button
Press:
This is used to set, play and call out temporary cue points.
! When the [CUE ( )] button is pressed while pausing, the tempo-
rary cue point is set.
! When the [CUE ( )] button is pressed during playback, the track
returns to the temporary cue point and pauses. (Back Cue)
! When the [CUE ( )] button is pressed and held after the track
returns to the temporary cue point, playback continues as long
as the button is pressed in. (Cue Sampler)