Pioneer DDJ-SB - Manual (Page 7)

En 7
Connections
and
part
names
Connections and part names
Connections
Always disconnect the USB cable before making or changing equipment
connections.
Be sure to use the USB cable included with this product.
Refer to the operating instructions for the component to be connected.
With this unit, the power is supplied by USB bus power. The unit can be
used simply by connecting it to a computer using the USB cable.
! Connect the computer to which this unit is to be connected to an AC
power supply.
! A USB hub cannot be used.
! In cases like the ones below, the power may be insufficient and this
unit may not operate on USB bus power.
— When the computer’s USB power supply capacity is insufficient.
— When other USB devices are connected to the computer.
— When headphones with an impedance of less than 32 W are
connected.
— When headphones are simultaneously connected to the stereo
phone jack and the stereo mini-phone jack.
— When a monaural jack is connected to the [HEADPHONES]
terminal.
Rear panel
USB
R L
MASTER OUT MASTER OUT
1 3 2
Power amplifier, powered speakers, etc.
L R
1 USB terminal
Connect to a computer.
! Connect this unit and the computer directly using the included
USB cable.
! A USB hub cannot be used.
2 Kensington security slot
3 MASTER OUT terminals
Connect a power amplifier, powered speakers, etc., here.
! Compatible with RCA pin-jack type unbalanced outputs.
Main unit side panel
Microphone Headphones
3 2 1
1 MIC LEVEL control
Adjusts the audio level input to the [MIC] terminal.
2 MIC jack
Connects a microphone here.
3 HEADPHONES jacks
Connect headphones here.
Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs (Ø
3.5 mm) can be used.
! There are two input jacks, both a stereo phones jack and a mini
phones jack, but do not use both simultaneously. If both are used
simultaneously, when one is disconnected and/or connected, the
volume of the other may increase or decrease suddenly.
Part names and functions
The functions of the parts introduced here are based on the functions of
Serato DJ Intro.
Descriptions of functions that can be used after upgrading to Serato DJ
are indicated
Serato DJ
.
For details of the functions, see the Pioneer DJ support site below.
http://pioneerdj.com/support/
0
1 Browser section
2 Deck section
3 Mixer section
4 Effect section
Browser section
BROWSE
PANEL
LOAD
BACK
LOAD
MAX
MAX
MIN
MIN
1 1 2 3
1 LOAD button
Press:
The selected tracks are loaded to the respective decks.
! When the [LOAD] button is pressed twice, the tracks loaded in
the selected deck on the opposite side are loaded into the deck
whose [LOAD] button was pressed. When this is done while
a track is playing, the track is played from the same position.
(Instant Double)