Pioneer DDJ-SB - Manual (Page 4)

En 4
About the Serato DJ Intro software
Serato DJ Intro is a DJ software application by Serato. DJ performances
are possible by connecting the computer on which this software is
installed to this unit.
Minimum operating environment
Supported operating
systems
CPU and required memory
Mac OS X: 10.8, 10.7 and
10.6 Intel ® processor, Core™ Duo 1.6 GHz or better
1 GB or more of RAM
Windows: Windows 7 (SP1)
and Windows Vista (SP1) Intel ® processor, Core™ 2 Duo 2.0 GHz or better
1 GB or more of RAM
Others
Optical drive Optical disc drive on which the CD-ROM can be read
USB port
A USB 2.0 port is required to connect the computer
with this unit.
Display resolution Resolution of 1 024 x 768 or greater
Internet connection
An Internet connection is required for registering
the “Serato.com” user account and downloading the
software.
! For the latest information on the required operating environment and compat-
ibility as well as to acquire the latest operating system, refer to “Software Info”
under “DDJ-SB” on the Pioneer DJ support site below.
http://pioneerdj.com/support/
! Operating System support assumes you are using the latest point release for
that version.
! Operation is not guaranteed on all computers, even if all the required operating
environment conditions indicated here are fulfilled.
! Depending on the computer’s power-saving settings, etc., the CPU and hard
disk may not provide sufficient processing capabilities. For notebook comput-
ers in particular, make sure the computer is in the proper conditions to provide
constant high performance (for example by keeping the AC power connected)
when using Serato DJ Intro.
! Use of the Internet requires a separate contract with a provider offering Internet
services and payment of provider fees.
About the installation procedure
The installation procedure depends on the operating system (OS) on the
computer you are using.
For Windows
After installing the driver software, install the Serato DJ Intro software.
For Mac OS X
Only install the Serato DJ Intro software.
Installation Procedure (Windows)
Do not connect this unit and the computer until installation is completed.
! Log on as the user which was set as the computer’s administrator
before installing.
! If any other programs are running on the computer, quit them.
1 Insert the CD-ROM into the computer’s optical drive.
The CD-ROM menu is displayed.
! If the CD-ROM menu does not appear when the CD-ROM is inserted,
open the optical drive from [Computer (or My Computer)] in the
[Start] menu, then double-click the [CD_menu.exe] icon.
2 When the CD-ROM menu appears, select [Install
Driver Software (Pioneer_DDJ_SB_Driver_x.xxx.exe)],
then click [Start].
! To close the CD-ROM menu, click [Exit].
3 Proceed with installation according to the instructions
on the screen.
If [Windows Security] appears on the screen while the installation is
in progress, click [Install this driver software anyway] and continue
with the installation.
When the installation program is completed, a completion message
appears.
After installing the driver software, install the Serato DJ Intro software.
4 Select [Download Serato DJ Intro Software] from the
CD-ROM’s menu, then click [Start].
5 “An internet environment is required to access the
site. Connected to the internet?” is displayed. Click [Yes].
The web browser is launched and the Pioneer DJ support site is
displayed.
6 Click [Software Info] under [DDJ-SB] on the Pioneer DJ
support site.
7 Click the link to the Serato DJ Intro download page.
The Serato DJ Intro download page is displayed.
8 Log in to your “Serato.com” user account.
! If you have already registered a user account on “Serato.com”, pro-
ceed to step 10.
! If you have not completed registering your user account, do so fol-
lowing the procedure below.
— Following the instructions on the screen, input your e-mail
address and the password you want to set, then select the region
in which you live.
— If you check [E-mail me Serato newsletters], newsletters pro-
viding the latest information on Serato products will be sent from
Serato.
— Once user account registration is completed, you will receive an
e-mail at the e-mail address you have input. Check the contents
of the e-mail sent from “Serato.com”.
! Be careful not to forget the e-mail address and password specified
when you performed user registration. They will be required for
updating the software.
! The personal information input when registering a new user account
may be collected, processed and used based on the privacy policy on
the Serato website.
9 Click the link in the e-mail message sent from “Serato.
com”.
This takes you to the Serato DJ Intro download page. Proceed to step 11.
10 Log in.
Input the e-mail address and password you have registered to log in to
“Serato.com”.
11 Download the Serato DJ Intro software from the
download page.
Unzip the downloaded file, then double-click the unzipped file to launch
the installer.
12 Read the terms of the license agreement carefully,
and if you agree, select [I accept the agreement], then
click [Next].
! If you do not agree to the contents of the license agreement, click
[Cancel] to cancel installation.
Installation begins.
The message of successful installation appears once installation is
completed.