Using the guide plus+™ electronic program guide 05 – Pioneer DVR-530H-S User Manual
Page 45
Using the GUIDE Plus+™ electronic program guide
05
45
En
Setting a ShowView™* recording
1
Select ‘Schedule’ from the Menu bar.
2
Press the RED Action button (ShowView).
3
Use the number buttons to enter a ShowView
programming number.
• If you live in an area not yet covered by GUIDE Plus+
you may also have to input a channel number. Follow
the on-screen display to do this.
4
Press
ENTER
to confirm.
*
is a trademark of Gemstar Development
Corporation.
The ShowView system is manufactured under license from
Gemstar Development Corporation.
Setting a manual recording
1
Select ‘Schedule’ from the Menu bar.
2
Press the GREEN Action button (Manual).
3
Use the number and
/ / /
buttons to enter
the recording date, then press the GREEN Action
button (Next).
4
In the same way, enter the recording start time,
followed by the GREEN Action button (Next) to
confirm.
5
Enter the recording end time in the same way,
followed by the GREEN Action button (Next) to
confirm.
®
DVR-530H_EU.book 45 ページ ２００５年２月１４日 月曜日 午後２時２０分