beautypg.com

Cleaning the pickup lens, Condensation, Hints on installation – Pioneer DVR-530H-S User Manual

Page 120: Additional information 15

background image

Additional information

15

120

En

Cleaning the pickup lens

The DVD recorder’s lens should not become dirty in
normal use, but if for some reason it should malfunction
due to dust or dirt, consult your nearest Pioneer-
authorized service center. Although lens cleaners are
commercially available, we do not recommend using
them since some may damage the lens.

Condensation

Condensation may form inside the recorder if it is
brought into a warm room from outside, or if the
temperature of the room rises quickly. Although the
condensation won’t damage the recorder, it may
temporarily impair its performance. For this reason you
should leave it to adjust to the warmer temperature for
about an hour before switching on and using.

Hints on installation

We want you to enjoy using this unit for years to come, so
please bear in mind the following points when choosing
a suitable location for it:

Do...

Use in a well-ventilated room.

Place on a solid, flat, level surface, such as a table,

shelf or stereo rack.

Don’t...

Use in a place exposed to high temperatures or

humidity, including near radiators and other heat-
generating appliances.

Place on a window sill or other place where the

recorder will be exposed to direct sunlight.

Use in a dusty or damp environment or in a room

where it will be exposed to excessive cigarette smoke.

Place directly on top of an amplifier, or other

component in your stereo system that becomes hot in
use.

Use near a television or monitor as you may

experience interference—especially if the television uses
an indoor antenna.

Use in a kitchen or other room where the recorder

may be exposed to smoke or steam.

Use on a thick rug or carpet, or cover with cloth—this

may prevent proper cooling of the unit.

Place on an unstable surface, or one that is not large

enough to support all four of the unit’s feet.

Moving the recorder

If you need to move the recorder, first remove the disc, if
there’s one loaded, and close the disc tray. Next, press

STANDBY/ON

to switch the power to standby, checking

that the

POWER OFF

indication in the display goes off.

Wait at least two minutes. Lastly, disconnect the power
cord. Never lift or move the unit during playback or
recording—discs rotate at a high speed and may be
damaged.

DVR-530H_EU.book 120 ページ 2005年2月14日 月曜日 午後2時20分