Pioneer DVR-530H-S - Manual (Page 25)

Getting started 04
25
En
Chapter 4
Getting started
Switching on and setting up
When you switch the recorder on for the first time, you
can make several basic settings using the Setup
Navigator feature. This takes you through setting the
clock, the internal TV tuner and the video output settings.
If you’re using the recorder for the first time, we strongly
recommend you use the Setup Navigator before starting
to use the recorder.
1 Switch on your TV and set the video input to this
recorder.
2 Press the STANDBY/ON button on the remote
control or the front panel to switch on.
When you switch on for the first time, your TV should
display the Setup Navigator screen. (If the Setup
Navigator doesn’t appear, you can also access it from the
Initial Setup menu; see page 100).
• If this recorder is connected to a compatible TV using
a fully-wired 21-pin SCART cable, the recorder will
take a few seconds to download country, TV screen
size and language information. (Check the manual
that came with your TV for compatibility information.)
3 Use the / buttons to choose a language, then
press ENTER.
4 Press ENTER to start setting up using the Setup
Navigator.
• If you don’t want to use the Setup Navigator, press
to select Cancel, then press ENTER to exit the Setup
Navigator.
5 Select the Auto Channel Setting (‘Auto Scan’ or
‘Download from TV’), or ‘Do not set’, then press
ENTER.
• Select Do not set if you want to skip setting up the
channels (because they have already been set up, for
example).
• You can only use the Download from TV feature if
you connected this recorder to your TV using a
fully-wired 21-pin SCART cable connected to the
AV1(RGB)-TV connector, and if your TV supports this
function (check your TV’s instruction manual for
more details).
STANDBY/ON
ENTER
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Clock Setting
Input Line System
Power Save
Help
Setup Navigator Setup Navigator
Language
français
Italiano
Nederlands
Pycc
English
Deutsch
Español
Svenska K N N
Basic
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Clock Setting
Input Line System
Power Save
Help
Setup Navigator Setup Navigator
Basic
Start
Cancel
Start
Complete this setup before you
start using your recorder.
Please use the Initial Setup if you
want to make more detailed settings.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Clock Setting
Input Line System
Power Save
Help
Setup Navigator Setup Navigator
Basic Auto Channel Setting
English
Download from TV
Do not Set
Auto Scan
04 Getting_Started.fm 25 ページ ２００５年２月１４日 月曜日 午後４時３７分