Pioneer DVR-530H-S - Manual (Page 20)

Connecting up 02
20
En
Connecting other AV sources
Connecting a VCR or analog camcorder
1 Connect a set of audio and video inputs of your
VCR or camcorder to a set of outputs on this
recorder.
This enables you to record from this recorder to your VCR
or camcorder.
• You can use standard video or S-video cables for the
video connection.
• Alternatively, you can use the AV2(INPUT 1/
DECODER) SCART connector for audio/video input
and output with just one SCART cable.
2 Connect a set of audio and video outputs of your
VCR or camcorder to a set of inputs on this recorder.
This enables you to record tapes from your VCR or
camcorder.
• You can use standard video or S-video cables for the
video connection.
• The front panel connections make convenient
connections for a camcorder input.
Connecting a DV camcorder
Using the front panel DV IN jack, it is possible to connect
a DV camcorder or video deck, or DVD-R/RW recorder
and digitally transfer DV tapes or DVD-R/RW discs to
DVD-R/RW.
Important
• This jack is for connection to DV equipment only. It is
not compatible with digital satellite receivers or D-
VHS video decks.
1 Use a DV cable (not supplied) to connect the DV
jack of your DV camcorder/video deck to the front
panel DV IN jack of this recorder.
Plugging in
After checking all the connections, plug in the recorder.
1 Use the supplied power cable to connect this
recorder to a power outlet.
Analog camcorder
VCR
PULL-OPEN REC STANDBY/ON
HDD/DVD OPEN/CLOSE
AUDIO/VIDEO
OUTPUT
AUDIO/VIDEO
INPUT
1 2
AUDIO/VIDEO
INPUT
AUDIO/VIDEO
OUTPUT
DV camcorder
PULL-OPEN REC STANDBY/ON
HDD/DVD OPEN/CLOSE
DV
OUT
DV
IN
DVR-530H_EU.book 20 ページ ２００５年２月１４日 月曜日 午後２時２０分