Pioneer HTP-SB300 - Manual (Page 8)

Installation 01
8
En
Concerning the placement of
this system
Caution
• When assembling the system, lay them
down flat on their side to avoid accidents or
injury. Make sure to use a stable surface
when assembling, setting up, and placing
the system.
This system allows you to enjoy 3.1 channel
surround sound merely by installing the main
unit and subwoofer.
To achieve optimum audio performance, place
the main unit beneath the television monitor.
The subwoofer receives its audio signals
wirelessly from the main unit, so it requires no
speaker cables, allowing you to place it in the
most convenient location (a power cord
connection is required, however).
Important
Precautions regarding subwoofer installation:
• Do not place objects behind the subwoofer
and occlude the ventilation ports.
• Sound from the subwoofer may be
interrupted due to poor signal conditions,
but this is not a malfunction. If it occurs,
rearrange the position and orientation of the
main unit and/or subwoofer as required.
• The subwoofer is designed to be used
within a distance of 10 m from the main
unit. The actual distance within which it
can be used, however, may be less,
depending on the environment and design
of the room where it is used.
• Signal reception by the subwoofer may be
unstable if it is placed too close to the main
unit. In this case, separate the subwoofer
at least 1 m from the main unit.
• Signal reception by the subwoofer may be
interrupted if an obstruction (metal door or
concrete wall, aluminum covered
insulation, etc.) is placed between it and
the main unit. In this case, install the
subwoofer in an uninterrupted line-of-sight
orientation from the main unit.
Main unit
Subwoofer
HTP-SB300_SVYXCN_En.book 8 ページ ２００９年１０月２３日 金曜日 午後１時５８分