Pioneer HTP-SB300 - Manual (Page 28)

Controlling the rest of your system 05
28
En
Controls for TVs
This remote control can control TV after entering the proper code (see Select preset codes for TVs
on page 26). To operate a TV, press
INPUT SELECT button for the input to which the TV is
connected.
• The TV CONTROL buttons on the remote control are dedicated to control the TV assigned to
the button.
Button(s) Function Components
TV CONTROL  a
a.When an input for a component other than a TV is selected, a TV assigned to can be operated.
Switches the DTV on or off. DTV
Switches the TV or CATV between standby and on. Cable TV/Satellite TV/TV
TV CONTROL
INPUT a
Switches the TV input. (Not possible with all models.) TV
TV CONTROL
CH +/– a
Selects channels. Cable TV/Satellite TV/TV/
DTV
TV CONTROL
VOL +/–
a
Adjust the TV volume. Cable TV/Satellite TV/TV/
DTV
 SOURCE Press to switch the component assigned to the TV
button on or off.
Cable TV/Satellite TV/TV/
DTV
DTV/TV Switches between the DTV and analog TV input modes
for Pioneer flat screen TVs. DTV/TV
TOP MENU Switches TEXT ON/OFF for TVs. TV
HOME MENU Use as the GUIDE button for navigating. Cable TV/Satellite TV/TV/
DTV
RETURN Use to select closed captioning with DTV. DTV
Number
buttons Use to select a specific TV channel. Cable TV/Satellite TV/TV/
DTV
+10 button Use to add a decimal points when selecting TV
channels. DTV
ENTER Use to enter a channel. Cable TV/Satellite TV/TV/
DTV
MENU Press to display the DTV menu. DTV
Select the menu screen. Cable TV/Satellite TV/TV
 &
ENTER Press to select or adjust and navigate items on the
menu screen. Cable TV/Satellite TV/TV/
DTV
CH +/– Selects channels. Cable TV/Satellite TV/TV/
DTV
HTP-SB300_SVYXCN_En.book 28 ページ ２００９年１０月２３日 金曜日 午後１時５８分