Pioneer HTP-SB300 - Manual (Page 20)

Listening to your system 04
20
En
Chapter 4
Listening to your system
Important
• The listening modes and many features
described in this section may not be
available depending on the current source,
settings and status of the system.
Basic operation
Procedures for listening to audio from the
connected component.
1 Turn on the power of the playback
component.
2 Press  SYSTEM to turn on the power of
this system.
3 Select the source you want to playback.
Use INPUT SELECT (or front panel INPUT)
buttons.
4 Start playback of the component you
selected in step 1.
5 Select the listening mode.
Use the listening mode buttons.
6 Press MASTER VOLUME +/– to adjust the
volume.
Auto playback
The simplest, most direct listening option is the
Auto Surround feature. With this, the system
automatically detects what kind of source
you’re playing and selects multichannel or
stereo playback as necessary.
1
• While listening to a source, press AUTO/
DIRECT 2 for auto playback of a source.
Press repeatedly until AUTO SURROUND
shows briefly in the display (it will then show
the decoding or playback format). Check the
digital format indicators in the display to see
how the source is being processed.
SYSTEM SYSTEM
TV CONTROL
HDMI1 HDMI2
OPTICAL
LISTENING MODE
COAXIAL
STANDARD
AUTO/
DIRECT
STEREO/
A.L.C.
ADV SURR
CH
VOL
BD MENU
DIMMER
SOURCE INPUT
INPUT
INPUT
TV CODE
ENTER
MUTE
Note
1 Stereo surround (matrix) formats are decoded accordingly using DOLBY PLII MOVIE (see Listening in surround
sound above for more on these decoding formats).
2 For more options using this button, see Using Stream Direct on page 22.
LISTENING MODE
STANDARD
AUTO/
DIRECT
STEREO/
A.L.C.
ADV SURR
VOL
BD MENU
DIMMER
TV CODE
HTP-SB300_SVYXCN_En.book 20 ページ ２００９年１０月２３日 金曜日 午後１時５８分