Pioneer HTP-SB300 - Manual (Page 16)

Controls and displays 03
16
En
5 Dolby Digital indicators
2D
Lights when a Dolby Digital encoded signal
is detected.
2D +
Lights when a source with Dolby Digital
Plus encoded audio signals is detected.
2HD
Lights when a source with Dolby TrueHD
encoded audio signals is detected.
2PLll
Lights to indicate
2 Pro Logic II decoding
(see Listening in surround sound on
page 21 for more on this).
6 ADV.S.
Lights when one of the Advanced Surround
modes has been selected (see Using the
Advanced surround effects on page 21 for more
on this).
7 SIGNAL SELECT indicators
DIGITAL
Lights when a digital audio signal is
selected.
Blinks when a digital audio signal is not
selected.
HDMI
Lights when an HDMI signal is selected.
Blinks when an HDMI signal is not
selected.
8 Dimmer indicator
Lights when DIMMER is set to off.
9 DIR.
Lights when the DIRECT or PURE DIRECT
mode is switched on (page 22).
Subwoofer
1 Wireless indicator
Standby mode: Lights red
During subwoofer operation: Lights green
1
HTP-SB300_SVYXCN_En.book 16 ページ ２００９年１０月２３日 金曜日 午後１時５８分