Pioneer AVH-P6000DVD - Manual (Page 71)

Introduction of audio
adjustments
1
1 Audio display
Shows the audio function names.
Important
If the multi-channel processor (DEQ-P6600) is
connected to this unit, the audio function will be
changed to the multi-channel processor
’s audio
menu. For details, refer to Introduction of DSP ad-
justments on page 76.
1 Touch AUDIO MENU to display MENU.
MENU appears on the display.
# You can also display MENU by clicking the
joystick on the remote control.
2 Touch AUDIO to display the audio func-
tion names.
The audio function names are displayed and
operable ones are highlighted.
# To go to the next group of function names,
touch
NEXT.
# To return to the previous group of function
names, touch
PREV.
# Only when the PREOUT setting in the initial
menu is
FULL, NON FADING will be displayed in-
stead of SUB WOOFER. (Refer to Setting the rear
output and subwoofer controller on page 95.)
# When selecting FM as the source, you cannot
switch to
SLA.
# To return to the previous display, touch BACK.
# To return to the display of each source, touch
ESC.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1 Touch FADER BALANCE on the audio
function menu.
# When the rear output setting is SUB. W,
BALANCE will be displayed instead of
FADER BALANCE. Refer to Setting the rear output
and subwoofer controller on page 95.
2 Touch a or b to adjust front/rear
speaker balance.
Each time you touch a or b it moves the
front/rear speaker balance towards the front or
the rear.
FRONT:15 to REAR:15 is displayed as the
front/rear speaker balance moves from front to
rear.
# FR:00 is the proper setting when only two
speakers are used.
# When the rear output setting is SUB. W, you
cannot adjust front/rear speaker balance. Refer to
Setting the rear output and subwoofer controller
on page 95.
3 Touch c or d to adjust left/right speak-
er balance.
Each time you touch c or d it moves the left/
right speaker balance towards the left or the
right.
LEFT:09 to RIGHT:09 is displayed as the left/
right speaker balance moves from left to
right.
Audio Adjustments
En
71
Section
16
Audio
Adjustments