beautypg.com

About the demo mode, Use and care of the remote control, Before you start – Pioneer AVH-P6000DVD User Manual

Page 12: Installing the battery

background image

1

Turn the ignition switch OFF.

2

Press RESET with a pen tip or other

pointed instrument.

RESET button

Notes

! When using with AVG-VDP1, if you press

RESET, be sure ACC OFF is selected. If ACC
ON is selected, correct operation may not be
possible even if you press

RESET.

! After completing connections or when you

want to erase all memorized settings or return
the unit to its initial (factory) settings, switch
your engine ON or set the ignition switch to
ACC ON before pressing

RESET.

About the demo mode

Important

The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.

The feature demo automatically starts when
you select the source

OFF. The demo con-

tinues while the ignition switch is set to ACC
or ON. To cancel the feature demo, press and
hold

ENTERTAINMENT (ENT). To restart the

feature demo, press and hold
ENTERTAINMENT (ENT) again. Remember
that if the feature demo continues operating

when the car engine is turned off, it may drain
battery power.

Use and care of the remote
control

Installing the battery

Slide the tray on the back of the remote con-
trol out and insert the battery with the plus (+)
and minus (

–) poles aligned properly.

! When using for the first time, pull out the

film protruding from the tray.

WARNING

Keep the battery out of the reach of children.
Should the battery be swallowed, consult a doc-
tor immediately.

CAUTION

! Use one CR2025 (3 V) lithium battery.
! Remove the battery if the remote control is not

used for a month or longer.

! There is a danger of explosion if the battery is

incorrectly replaced. Replace only with the
same or equivalent type.

! Do not handle the battery with metallic tools.
! Do not store the battery with metallic objects.
! If the battery leaks, wipe the remote control

completely clean and install a new battery.

! When disposing of used batteries, comply

with governmental regulations or environmen-
tal public institutions

’ rules that apply in your

country/area.

Before You Start

En

12

Section

02