Pioneer AVH-P6000DVD - Manual (Page 104)

! If you select A/B and if in case you need to
operate other Pioneer units (may be avail-
able in the future), take the following proce-
dure and change the code type to the
appropriate type.
2 Press 0 and CLEAR on the remote con-
trol simultaneously to change the code
type.
Initially, the code type is set to
A. Each time
you press 0 and CLEAR simultaneously on the
remote control the code type switches be-
tween
A and B.
Using the preprogrammed
function
You can operate the preprogrammed functions
for each source by using
PGM.
! In order to use PGM button for prepro-
grammed function, the remote control op-
eration mode switch should be set to
AVH.
% Press PGM to turn pause on when se-
lecting the following sources:
! DVD-V – Built-in DVD player
! M-CD – Multi-CD player
! iPod – iPod
! BT Audio – Bluetooth audio player
# To turn pause off, press PGM again.
% Press PGM and hold to turn BSM on
when selecting TUNER as the source.
Press
PGM and hold until the BSM turns on.
# To cancel the storage process, press PGM
again.
% Press PGM and hold to turn BSSM on
when selecting TV as the source.
Press
PGM and hold until the BSSM turns on.
# To cancel the storage process, press PGM
again.
Other Functions
En
104
Section
21