Pioneer SC-LX73 - Manual (Page 16)

Controls and displays 02
16
En
STREAM DIRECT – Lights when Direct/Pure Direct is
selected (page 59).
ADV.SURROUND – Lights when one of the
Advanced Surround modes has been selected
(page 58).
STEREO – Lights when stereo listening is switched
on (page 58).
STANDARD – Lights when one of the Standard
Surround modes is switched on (page 56).
THX – Lights when one of the Home THX modes is
selected (page 57).
7 (PHASE CONTROL)
Lights when the Phase Control or Full Band Phase
Control
1
is switched on (page 59 and 60).
8 Analog signal indicators
Light to indicate reducing the level of an analog signal
(page 76).
9 SOUND
Lights when any of the Midnight, Loudness or tone
controls features is selected (page 72).
Lights when Dialog Enhancement is switched on.
10 Tuner indicators
TUNED – Lights when a broadcast is being received.
STEREO – Lights when a stereo FM broadcast is being
received in auto stereo mode.
MONO – Lights when the mono mode is set using
MPX.
RDS – Lights when an RDS broadcast is received.
11
Lights when the sound is muted (page 15).
12 Master volume level
Shows the overall volume level.
“
---” indicates the minimum level, and “+12dB” indicates
the maximum level.
13 Input function indicators
Light to indicate the input function you have selected.
(
HMG only lights for the SC-LX83.)
14 Scroll indicators
Light when there are more selectable items when making
the various settings.
15 Speaker indicators
Lights to indicate the current speaker system,
A and/or B
(page 75).
16 SLEEP
Lights when the receiver is in sleep mode (page 77).
17 Matrix decoding format indicators
2PRO LOGIC IIx – This lights to indicate 2 Pro
Logic II /
2 Pro Logic IIx decoding (page 56).
Neo:6 – When one of the Neo:6 modes of the receiver
is on, this lights to indicate Neo:6 processing (page 56).
18 S.RTRV
Lights when the Sound Retriever function is active
(page 72).
19 Character display
Displays various system information.
20 Remote control mode indicator
Lights to indicate the receiver’s remote control mode
setting. (Not displayed when set to
1.) (SC-LX83: page 80,
SC-LX73: page 92)
Note
1 Full Band Phase Control is only apply to the SC-LX83.