Pioneer VSX-527-K - Manual (Page 41)

Playback with NETWORK features 6 6
41
Registering broadcast stations not on the vTuner list
from the special Pioneer site
With the receiver, broadcast stations not included on the list
of station distributed by vTuner can be registered and played.
Check the access code required for registration on the
receiver, use this access code to access the special Pioneer
Internet radio site and register the desired broadcast stations
in your favorites. The address of the special Pioneer Internet
radio site is:
http://www.radio-pioneer.com
1
Display the Internet Radio list screen.
To display the Internet Radio list screen, perform step 1 at
Playback with Network functions on page 40 .
2
Use / to select ‘Help’, then press ENTER .
3
Use / to select ‘Get access code’, then press ENTER .
The access code required for registration on the special
Pioneer Internet radio site is displayed. Make a memo of
this address.
The following can be checked on the Help screen:
• Get access code – The access code required for
registration on the special Pioneer Internet radio site is
displayed.
• Show Your WebID/PW – After registering on the
special Pioneer Internet radio site, the registered ID
and password are displayed.
• Reset Your WebID/PW – Resets all the information
registered on the special Pioneer Internet radio site.
When reset, all the registered broadcast stations are
also cleared. If you want to listen to the same stations,
re-register after resetting.
4
Access the special Pioneer Internet radio site from your
computer and perform the registration process.
http://www.radio-pioneer.com
Access the above site and use the access code in step 3
to perform user registration, following the instructions on
the screen.
5
Register the desired broadcast stations as your
favorites, following the instructions on the computer’s
screen.
Both broadcast stations not on the vTuner list and
stations on the vTuner list can be registered. In this case
they are registered on the receiver as favorite broadcast
stations and can be played.
Playing back audio files stored on components on
the network
This unit allows you to play music on media servers connected
on an identical Local Area Network (LAN) as the receiver. This
unit allows for the playing of files stored on the following
devices:
• PCs running Microsoft Windows Vista or XP with Windows
Media Player 11 installed
• PCs running Microsoft Windows 7 with Windows Media
Player 12 installed
• DLNA-compatible digital media servers (on PCs or other
components)
Playing back your favorite songs
Up to 64 favorite tracks on the media server and/or Internet
radio stations can be registered in the Favorites folder. Note
that only the audio files stored on components on the network
can be registered.
Registering and deleting audio files and Internet
radio stations in and from the Favorites folder
1
Press NETWORK to switch the remote control to the
M.SERVER or NETRADIO operation mode.
2
With the track or Internet radio station you want to
register selected, press
+Favorite .
The selected song or Internet radio station is then
registered in the Favorite.
Note
• To delete tracks or Internet radio stations that have been
registered, set the input to FAVORITE, select the track or
station to be deleted, then press CLEAR button.
The Network Setup menu
Setting up the network to listen to Internet radio on this
receiver.
1
Press NETWORK repeatedly to switch the receiver to
NETRADIO input.
2
Press HOME MENU .
Network Setup menu appears on your TV. Use ///
 and ENTER on the remote control to navigate through
the screens and select menu items. Press RETURN to
exit the current menu.
• Press HOME MENU at any time to exit the Network
Setup menu.
3
Select the setting you want to adjust.
• Network Configuration
- IP Address, Proxy – Sets up the IP address/Proxy of
this receiver (see below).
- Friendly Name – The name of the receiver displayed
on a computer or other device connected to the
network can be changed (see below).
- Parental Lock – Restricts usage of network
functions ( page 42 ).
• Language – Language can be set the NETWORK
function OSD screen ( page 43 ).
• Firmware Update – Use to update the receiver’s
software and check the version ( page 43 ).
• Factory Reset – Use to reset all network connection
settings to their initial, factory-setting condition
( page 43 ).
• System Info – You can check the network settings of
this receiver ( page 43 ).