Pioneer AVIC-F3210BT - Manual (Page 9)

= For detailed information about the items
which would be erased, refer to Returning
the navigation system to the default or fac-
tory settings on page 121.
The microprocessor must be reset under the
following conditions:
! Prior to using this product for the first time
after installation.
! If the product fails to operate properly.
! If there appear to be problems with the op-
eration of the system.
! When changing the combination of equip-
ment.
! When adding/removing additional pro-
ducts that connect to the navigation sys-
tem.
! If your vehicle position is shown on the
map with a significant positioning error.
% Press the RESET button with a pen tip
or other pointed implement.
RESET button
Engb
9
Chapter
01
Intr
oduction
Introduction