Pioneer AVIC-F3210BT - Manual (Page 117)

3 Turn MULTI-CONTROL to select
“Audio Menu”.
4 Press the centre of MULTI-CONTROL.
The
“Audio Menu” screen appears.
1 2 3 4
1 Source icon
Shows which source has been selected.
2 Screen title
3 Function currently selected
4 Setting value
5 Turn MULTI-CONTROL to select one of
the initial settings.
Turning
MULTI-CONTROL switches between
the functions in the following order:
Fader (balance adjustment)
—
Preset Equalizer (equaliser adjustment)
—
P.EQ Setting1 (equaliser band and the level of
equaliser band)
— P.EQ Setting2 (frequency
and Q factor)
— Loudness (loudness) — Sub-
Woofer1 (phase of subwoofer output)
— Sub-
Woofer2 (subwoofer setting) — Bass Booster
(bass booster)
— HPF (high pass filter) — SLA
(source level adjustment)
p When “Rear SP:F.Range” is selected in
“S/W Control” and “Rear” is selected in
“Preout”, SubWoofer1 cannot be ad-
justed.
p When “SubWoofer1” is turned off, “Sub-
Woofer2
” cannot be adjusted.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
p When “Rear SP:S/W” is selected in “S/W
Control
”, front/rear speaker balance can-
not be adjusted.
= For details, refer to Setting the rear out-
put and subwoofer controller on the pre-
vious page.
1 Display the
“Audio Menu” screen.
= For details, refer to Displaying the
“Audio Menu” screen on the previous
page.
2 Turn MULTI-CONTROL to select
“Fader”.
p If the balance setting has been previously
adjusted, Balance will be displayed.
3 Press MULTI-CONTROL up or down to
adjust front/rear speaker balance.
Each time
MULTI-CONTROL is pressed up or
down, the front/rear speaker balance moves
towards the front or rear.
“Front 15” to “Rear 15” is displayed as the
front/rear speaker balance moves from front to
rear.
Setting
“F/R 0” is correct when using a two
speaker system.
4 Press MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each time
MULTI-CONTROL is pressed left or
right, the left/right speaker balance moves to-
wards the left or right.
“Left 15” to “Right 15” is displayed as the left/
right speaker balance moves from left to
right.
Using the equaliser
The equaliser lets you adjust equalisation to
match vehicle interior acoustic characteristics
as desired.
Recalling equaliser curves
There are six stored equaliser curves that you
can easily recall at any time. Here is a list of
the equaliser curves:
Engb
117
Chapter
22
Customising
pr
eferences
Customising preferences