Pioneer AVIC-F3210BT - Manual (Page 80)

You can listen to the radio by using the naviga-
tion system. This section describes operations
for radio.
The functions related to RDS (Radio Data Sys-
tem) are available only in areas with FM sta-
tions broadcasting RDS signals. Even if the
navigation system is receiving an RDS station,
not all the functions related with RDS will be
available.
1 Press the SRC/OFF button to display the
“TUNER” screen.
= For details, refer to Switching the audio
source on page 77.
2 Press BAND/ESC button repeatedly
until the desired band is selected.
If you want to select MW/LW, press
BAND/ESC
button repeatedly until
“MW/LW” appears in
the display.
Reading the screen
1 2 3 4
6
7
8
9
a
5
1 Source icon
Shows which source has been selected.
2 Band
Shows which band the radio is tuned to: FM1,
FM2, FM3 or MW/LW.
3 Preset number indicated next to “P.CH”
Shows what preset item has been selected.
4 PTY*
Shows the programme type of the current sta-
tion (when available).
5 Program service name*
Shows the programme service name (station
name) of the current station. If the pro-
gramme service name (station name) cannot
be received, the frequency will be displayed in-
stead.
6 NEWS indicator*
Shows when the set news programme is re-
ceived.
7 TRFC indicator*
Shows when a TP station (a station that broad-
casts traffic information) is tuned in.
8 Signal level indicator
9 LOCAL indicator
Shows when local seek tuning is on.
= For details, refer to Tuning in strong sig-
nals on page 82.
a STEREO indicator
Shows when the selected frequency is being
broadcast in stereo.
p (*) These functions are only active when
your radio is tuned to an RDS station.
Using the touch panel keys
1
1 to :
Recalls radio stations.
= For details, refer to Storing and recalling
broadcast frequencies on the next
page.
Engb
80
Chapter
16 Using the radio (TUNER)