beautypg.com

Enhancing bass (bass booster), Using the high pass filter, Adjusting source levels – Pioneer AVIC-F3210BT User Manual

Page 120: 22 customising preferences

background image

Enhancing bass (Bass Booster)

You can enhance bass sounds that are often
muted by driving noise.

1

Display the

“Audio Menu” screen.

= For details, refer to Displaying the

“Audio Menu” screen on page 116.

2

Turn MULTI-CONTROL to select

“Bass

Booster

”.

3

Press MULTI-CONTROL up or down to

select a desired level.
“0” to “+6” is displayed as the level is in-
creased or decreased.

Using the high pass filter

When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, activate

HPF

(high pass filter). Only frequencies higher than
those in the selected range are output from
the front or rear speakers.

1

Display the

“Audio Menu” screen.

= For details, refer to Displaying the

“Audio Menu” screen on page 116.

2

Turn MULTI-CONTROL to select

“HPF”.

3

Press the centre of MULTI-CONTROL to

turn high pass filter on.

p To turn high pass filter off, press

MULTI-CONTROL again.

4

Press MULTI-CONTROL left or right to

select cut-off frequency.
Each time

MULTI-CONTROL is pressed left or

right, frequencies are selected in the following
order:
50 Hz

— 63 Hz — 80 Hz — 100 Hz —

125 Hz

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
p Settings are based on the FM tuner volume

level, which remains unchanged.

1

Compare the FM tuner volume level

with the level of the source you wish to ad-
just.

2

Display the

“Audio Menu” screen.

= For details, refer to Displaying the

“Audio Menu” screen on page 116.

3

Turn MULTI-CONTROL to select

“SLA”.

4

Press MULTI-CONTROL up or down to

adjust the source volume.
Each time

MULTI-CONTROL is pressed up or

down, source volume increases or decreases.
“+4” to “-4” is displayed as the source volume
is increased or decreased.

p The different source volume level can be set

between

iPod and USB.

p The source volume level for MW/LW can be

set separately from FM.

Engb

120

Chapter

22

Customising preferences

This manual is related to the following products: