Pioneer FH-P4000R - Manual (Page 49)

Initial Settings
En 49
11
Section
English
Español
Deutsch
F
rançais
Italiano
Nederlands
Adjusting initial settings Initial settings lets you perform initial set up of
different settings for this unit.
1 FUNCTION display
Shows the function status.
2 SOURCE/OFF button
Press and hold to turn off the unit.
3 FUNCTION button
Press to select a function of the initial set-
tings.
4
2/3 buttons
Press to choose the item (mode) of the
selected function.
5
5/∞ buttons
Press to adjust the selected function and
turn it on/off.
6 BAND/ESC button
Press to cancel initial settings.
1 Press SOURCE/OFF and hold until the unit
turns off.
2 Press FUNCTION and hold until FM STEP
appears in the display.
3 Press FUNCTION to select one of the initial
settings.
Press
FUNCTION repeatedly to switch between
the following settings:
FM STEP — A-PI — WARN — AUX — DIMMER —
REAR SP — DIG.ATT — CONTRAST
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press
BAND/ESC .
• You can also cancel initial settings by holding
down
FUNCTION until the unit turns off.
ENT ENT DISP DISP TEXT TEXT
TA TA SOURCE SOURCE / OFF / OFF
6 5 4 3 2 1
F D
A
4 6 5 2
3
1