Pioneer FH-P4000R - Manual (Page 22)

En 22
06
Section
Cassette Player
• You can eject a cassette tape by pressing
TAPE EJECT .
• When a metal or chrome tape is inserted MTL
is lit on the display. Nothing is displayed for a
normal tape.
2 After a cassette tape has been inserted,
press
SOURCE/OFF to select the cassette
player.
Press
SOURCE/OFF until you see Cassette dis-
played.
3 Use VOLUME to adjust the sound level.
When you press VOLUME up/+, the volume is
raised and when pressed down/–, the volume is
lowered.
4 To perform fast forward or rewind, press
2
or
3.
FF or REW appears in the display.
• To cancel fast forward or rewind and return to
playback, press
BAND/ESC .
• You can cancel fast forward or rewind by
pressing
2 or 3 in the same direction twice.
5 To perform forward or rewind music
search, press
2 or 3 twice.
F-MS (forward music search) or R-MS (rewind
music search) appears in the display. The cas-
sette player will fast forward or rewind to the
next or previous blank spot on the tape and
begin to play.
• To cancel music search and return to play-
back, press
BAND/ESC .
• You can cancel music search by pressing
2
or
3 in the same direction again.
6 To change the direction of the tape trans-
port, press
BAND/ESC .
Notes
• Do not insert anything other than a cassette
tape into the cassette loading slot.
• PLAY TIME indicator starts from 00’00 in the
following cases:
— When a tape is inserted
— When the tape direction is changed
— When you rewind the tape to the beginning
• PLAY TIME indicator is halted when fast for-
ward, rewind or music search is operating.