Pioneer FH-P4000R - Manual (Page 40)

En 40
09
Section
Audio Adjustments
Introduction of audio
adjustments 1 AUDIO display
Shows the audio adjustments status.
2 LOUD indicator
Appears in the display when loudness is
turned on.
3 AUDIO button
Press to select an audio function.
4
5/∞ buttons
Press to adjust the selected audio function
and turn it on/off.
5
2/3 buttons
Press to adjust the selected audio function.
6 BAND/ESC button
Press to return to the display of each source.
Press AUDIO to display the audio function
names.
Press
AUDIO repeatedly to switch between the
following audio functions:
FADER (balance adjustment)— LOUD (loud-
ness)— SLA (source level adjustment)
• When selecting the FM tuner as the source,
you cannot switch to
SLA .
• To return to the display of each source, press
BAND/ESC .
Note
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
ENT ENT DISP DISP TEXT TEXT
TA TA SOURCE SOURCE / OFF / OFF
6 5 4 3 2 1
F D
A
3 4 5 6
2 1