Pioneer FH-P4000R - Manual (Page 15)

RDS
En 15
05
Section
English
Español
Deutsch
F
rançais
Italiano
Nederlands
Press FUNCTION to display the function
names.
Press
FUNCTION repeatedly to switch between
the following functions:
BSM (best stations memory)— REG (regional)—
LOCAL (local seek tuning)— PTY SELECT (pro-
gram type selection)— TA (traffic announce-
ment standby)— NEWS (news program
interruption)— AF (alternative frequencies
search)
• To return to the frequency display, press
BAND/ESC.
• If MW/LW band is selected, you can only
select
BSM or LOCAL .
Notes
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the frequency display.
• RDS service may not be provided by all sta-
tions.
• RDS functions like AF and TA are only active
when your radio is tuned to a RDS station.
Switching the RDS display
When you tune in a RDS station its program
service name is displayed. If you want to know
the frequency you can.
Press DISPLAY .
Press DISPLAY repeatedly to switch between
the following settings:
Program service name—PTY information—
Frequency
PTY (program type ID code) information is listed
on page 20.
• PTY information and the frequency of the
current station appears on the display for eight
seconds.
• If a PTY code of zero is received from a station,
NONE is displayed. This indicates that the sta-
tion has not defined its program contents.
• If the signal is too weak for this unit to pick up
the PTY code,
NO PTY is displayed.
Selecting alternative frequencies
If you are listening to a broadcast and the recep-
tion becomes weak or there are other problems,
the unit will automatically search for a different
station in the same network which is broadcast-
ing a stronger signal.
• AF is on as a default.
1 Press FUNCTION to select AF.
Press FUNCTION until AF appears in the dis-
play.
2 Press
5 to turn
AF on.
Press
5 and
AF :ON is displayed.
3 Press
∞ to turn
AF off.
Press
∞ and
AF :OFF is displayed.