beautypg.com

Audio adjustments, Using balance adjustment, Adjusting loudness – Pioneer FH-P4000R User Manual

Page 41: Adjusting source levels

background image

Audio Adjustments

En

41

09

Section

English

Español

Deutsch

F

rançais

Italiano

Nederlands

Using balance adjustment

You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.

1 Press

AUDIO

to select

FADER

.

Press

AUDIO

until

FADER

appears in the dis-

play.
• If the balance setting has been previously
adjusted,

BAL

will be displayed.

2 Press

5 or to adjust front/rear speaker

balance.
Each press of

5 or ∞ moves the front/rear

speaker balance towards the front or the rear.

FADER :F25

FADER :R25

is displayed as the

front/rear speaker balance moves from front to
rear.

FADER : 0

is the proper setting when only two

speakers are used.
• When the rear output setting is subwoofer,
you cannot adjust front/rear speaker balance.
Refer to Switching the rear output setting on
page 51.

3 Press

2 or 3 to adjust left/right speaker

balance.
When you press

2 or 3,

BAL : 0

is displayed.

Each press of

2 or 3 moves the left/right

speaker balance towards the left or the right.

BAL :L25

BAL :R25

is displayed as the

left/right speaker balance moves from left to
right.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.

1 Press

AUDIO

to select

LOUD

.

Press

AUDIO

until

LOUD

appears in the display.

2 Press

5 to turn loudness on.

LOUD :ON

appears in the display.

3 Press

to turn loudness off.

LOUD :OFF

appears in the display.

Adjusting source levels

SLA (Source level adjustment) lets you adjust
the volume level of each source to prevent radi-
cal changes in volume when switching between
sources.
• Settings are based on the volume level of the

FM tuner, which remains unchanged.

1 Compare the FM tuner volume level with
the level of the source you wish to adjust (e.g.,
built-in CD player).

2 Press

AUDIO

to select

SLA

.

Press

AUDIO

until

SLA

appears in the display.

3 Press

5 or to adjust the source volume.

Each press of

5 or ∞ increases or decreases

the source volume.

SLA :+4

SLA :–4

is displayed as the source

volume is increased or decreased.