Pioneer FH-P4000R - Manual (Page 44)

Digital Signal Processor
En 44
10
Section
Press DSP to display the DSP function
names.
Press
DSP repeatedly to switch between the
following functions:
PWFL (graphic equalizer)— SFC (sound field
control)— POSI (position selector)
• To return to the display of each source, press
BAND/ESC .
• Depending on the graphic equalizer and sub-
woofer adjustments, pressing
DSP repeatedly
switches between the following functions:
CUSTOM (graphic equalizer)— 50Hz (9-band
graphic equalizer)— SFC (sound field control)—
POSI (position selector)— SUB.W (subwoofer)—
80Hz (subwoofer setting)— HPF (high pass filter)
Use the following instructions for more detail.
Note
• If you do not operate the DSP function within
about 30 seconds, the display is automatically
returned to the source display.
Using the graphic equalizer
The graphic equalizer lets you adjust the equal-
ization to match car interior acoustic character-
istics as desired.
Recalling equalizer curves
There are six stored equalizer curves which you
can easily recall at any time. Here is a list of the
equalizer curves:
Button Display Equalizer curve
1 S-BASS Super bass
2 PWFL Powerful
3 NTRL Natural
4 VOCAL Vocal
5 CUSTOM Custom
6 FLAT Flat
• CUSTOM is an adjusted equalizer curve that
you create. Adjustments can be made with an 9-
band graphic equalizer.
• When
FLAT is selected no supplement or
correction is made to the sound. This is useful
to check the effect of the equalizer curves by
switching alternatively between
FLAT and a set
equalizer curve.
1 Press DSP to select the graphic equalizer.
Press DSP until PWFL appears in the display.
• If the graphic equalizer has been previously
set to an equalizer curve other than
PWFL then
the title of that previously selected equalizer
curve will be displayed, such as
S-BASS , NTRL ,
VOCAL , CUSTOM , or FLAT .
2 Select a equalizer curve by pressing 1–6 .
Select the desired equalizer curve by pressing
one of the numbered buttons, from
1–6 , which
correspond to the different equalizer curves as
listed above.
• You can also sequentially select an equalizer
curve by pressing
2 or 3.