Pioneer FH-P4000R - Manual (Page 35)

Multi-CD Player
En 35
08
Section
English
Español
Deutsch
F
rançais
Italiano
Nederlands
3 Press
5 to turn scan play on.
SCAN :ON appears in the display. The first 10
seconds of each track of the present disc (or the
first track of each disc) is played.
4 When you find the desired track (or disc)
press
∞ to turn scan play off.
SCAN :OFF appears in the display. The track (or
disc) will continue to play.
• If the display has automatically returned to
the playback display, select
SCAN again by
pressing FUNCTION .
Note
• After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of the
CD.
1 Press FUNCTION to select PAUSE .
Press FUNCTION until PAUSE appears in the
display.
2 Press
5 to turn pause on.
PAUSE :ON appears in the display. Play of the
current track pauses.
3 Press
∞ to turn pause off.
PAUSE :OFF appears in the display. Play will
resume at the same point that you turned pause
on.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the multi-
CD player magazine. After you have added your
favorite tracks to the playlist you can turn on ITS
play and play just those selections.
Creating a playlist with ITS program-
ming
You can use ITS to enter and playback up to 24
tracks per disc, up to 100 discs (with the disc
title).
1 Play a CD that you want to program.
Press
5 or ∞ to select a CD.
2 Press FUNCTION and hold until TITLE IN
appears in the display, then press FUNCTION
to select ITS .
After TITLE IN is displayed, press FUNCTION
repeatedly, the following functions appear in the
display:
TITLE IN (disc title input)— ITS (ITS program-
ming)
3 Select a desired track by pressing
2 or 3.
4 Press
5 to store the currently playing track
in the playlist.
ITS IN is displayed briefly and the currently
playing selection is added to your playlist. The
display then shows
ITS again.
5 Press BAND/ESC to return to the playback
display.