Basic adjustment settings 08 – Pioneer PDP-507XD User Manual
Page 37
37
En
Basic Adjustment Settings
08
English
No Operation off (AV mode only)
The system will be automatically placed into the standby mode
when no operation is performed for three hours.
1
Press
HOME MENU.
2
Select “Power Control” ( / then
ENTER).
3
Select “No Operation off” ( / then
ENTER).
4
Select “Enable” ( / then
ENTER).
5
Press
HOME MENU to exit the menu.
NOTE
• Five minutes before the system is placed into the standby
mode, a message appears every minute.
Power Management (PC mode only)
The system will be automatically placed into the standby mode
when no signal is received from the personal computer.
1
Press
HOME MENU.
2
Select “Power Control” ( / then
ENTER).
3
Select “Power Management” ( / then
ENTER).
4
Select “Mode 1” or “Mode 2” ( / then
ENTER).
5
Press
HOME MENU to exit the menu.
Item
Description
Disable
(factory default)
Does not place the system into the standby
mode.
Enable
Places the system into the standby mode if no
operation is performed for three hours.
Item
Description
Off
(factory default)
No power management
Mode1
• Places the system into the standby mode
when no signal is received from the personal
computer for eight minutes.
• Even when you start using the computer and
a signal is received again, the system stays
off.
• The system is switched on again by pressing
STANDBY/ON on the Plasma Television or
TV a on the remote control unit.
Mode2
• Places the system into the standby mode
when no signal is received from the personal
computer for eight seconds.
• When you start using the computer and a
signal is input again, the system is switched
on.
• The system is switched on again by pressing
STANDBY/ON on the Plasma Television or
TV a on the remote control unit.
PDP507XDE.book Page 37 Friday, June 2, 2006 3:07 PM