Pioneer PDP 434HDE - Manual (Page 70)

12 Useful Adjustment Settings
70
En
Sleep Timer
When the selected time elapses, the Sleep Timer
automatically places the system into the standby mode.
1 Press HOME MENU.
2 Press / to select “Sleep Timer”, and then press
ENTER.
3 Press / to select the desired time, and then
press ENTER.
Sleep Timer
Remain 90min
Off
30min
60min
120min
90min
• You can select from among “Off” (cancel),
“30 min”, “60 min”, “90 min”, and “120 min”.
4 Press HOME MENU to exit the menu.
• Five minutes before the selected time elapses, the
remaining time appears every minute.
• To check the remaining time, do steps 1 and 2.
Using a password (AV mode only)
This system provides the Child Lock function for pre-
venting children from watching inappropriate
programmes. You need to enter a password when
watching programmes with “Block” specified. Before
the system is shipped, “1234” is preset as the factory-
default password. You can however, change the pass-
word as you want.
When using the Home menu you select “Auto Installa-
tion”, “Programme Setup”, or “Password”, a screen
prompting password entry appears to prevent others
from changing the programme settings at their
choices.
Entering a password
In a case where you select a channel blocked with
Child Lock or password entry is requested when at-
tempting to open the menu, enter a password correctly.
1 Enter a correct 4-digit password using buttons
0 – 9.
Please Input Your Password.
• If you fail password entry three times, “Invalid pass-
word.” appears, and the menu is closed. In order to
display the password entry screen again to unlock
the password, select the blocked channel or open the
menu again.