Pioneer PDP 434HDE - Manual (Page 20)

06 Preparation
20
En
Using the remote control unit
Use the remote control unit by pointing it towards the
remote control sensor. Objects between the remote
control unit and the sensor may prevent proper opera-
tion.
Cautions regarding the remote control
unit
• Do not expose the remote control unit to shock. In
addition, do not expose the remote control unit to
liquids, and do not place in an area with high humid-
ity.
• Do not install or place the remote control unit under
direct sunlight. The heat may cause deformation of
the unit.
• The remote control unit may not work properly if the
remote control sensor of the Plasma Display is under
direct sunlight or strong lighting. In such case,
change the angle of the lighting or Plasma Display
set, or operate the remote control unit closer to the
remote control sensor.
Inserting batteries
If the remote control unit fails to operate Plasma
Display System functions, replace the batteries in the
remote control unit.
1 Open the battery cover.
2 Insert the two AA size batteries supplied with the
product.
• Place batteries with their terminals corresponding
to the (+) and (–) indicators in the battery com-
partment.
3 Close the battery cover.
Cautions regarding batteries
Improper use of batteries can result in chemical
leakage or explosion. Be sure to follow the instructions
below.
• Do not use alkaline batteries. When you replace the
batteries, use manganese ones.
• Place the batteries with their terminals correspond-
ing to the (+) and (–) indicators.
• Do not mix batteries of different types. Different types
of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new
batteries can shorten the life of new batteries or
cause chemical leakage in old batteries.
• Remove batteries as soon as they have worn out.
Chemicals that leak from batteries can cause a rash.
If you find any chemical leakage, wipe thoroughly
with a cloth.
• The batteries supplied with this product may have a
shorter life expectancy due to storage conditions.
• If you will not use the remote control unit for an
extended period of time, remove the batteries from it.
• WHEN DISPOSING OF USED BATTERIES,
PLEASE COMPLY WITH GOVERNMENTAL REGU-
LATIONS OR ENVIRONMENTAL PUBLIC
INSTRUCTION’S RULES THAT APPLY IN
YOUR COUNTRY/AREA.