Pioneer PDP 434HDE - Manual (Page 234)

2
En
Using HDMI Input
The INPUT 3 terminals include HDMI terminals to
which digital video and audio signals can be input. To
use the HDMI terminal, activate the terminal and
specify the types of video and audio signals to be
received from the connected equipment. For the types
of these signals, see the operation manual that came
with the connected equipment.
To activate the HDMI terminal:
1 Press HOME MENU.
2 Press / to select “Option”, and then press
ENTER.
3 Press / to select “HDMI Input”, and then press
ENTER.
4 Press / to select “Setting”, and then press
ENTER.
5 Press / to select “Enable”, and then press
ENTER.
Setting
Disable
Enable
Item Description
Disable Deactivates the HDMI terminal.
(factory default)
Enable Activates the HDMI terminal.
6 Press HOME MENU to exit the menu.
SERVICE ONLY
i / o link.A
SELECT
CONTROL
SUB WOOFER
OUTPUT
INPUT 3
COMPONENT
S- VIDEO VIDEO R-AUDIO-L
MONITOR
OUTPUT
HDMI
Y P B P R
VIDEO
I N OUT
INPUT 1
INPUT 2 INPUT 3
AC INLET
BLACK
WHITE
SYSTEM CABLE
INPUT
2 3
INPUT 3
INPUT 1
INPUT 2 INPUT 3
Media Receiver (rear view)
SCART cable
(commercially available)
Connect the SCART cable only
when inputting analog audio
signals.
HDMI cable
(commercially available)
HDMI equipment
For the handling procedures and the other functions, refer to the dedicated
operation manual.
Connecting HDMI equipment
Input signal correlation table
1920
∗
1080i@50Hz
720
∗
576p@50Hz
1280
∗
720p@50Hz
720(1440)
∗
576i@50Hz
1920
∗
[email protected]/60Hz
720
∗
[email protected]/60Hz
1280
∗
[email protected]/60Hz
720(1440)
∗
[email protected]/60Hz
• PC signals are out of correspondence.
PDP-504HDE-HDMI (7L) 8/20/03, 18:39 2