Pioneer PDP 434HDE - Manual (Page 33)

08 Basic Adjustment Settings
English
33
En
Selecting a decoder input terminal
If you have connected a decoder, select a decoder input
terminal (INPUT1).
1 Follow steps 1 to 4 provided for using Manual
Adjust.
After selecting a channel for label entry (using
Programme Entry), do the followings steps.
2 Press / to select “Decoder”, and then press
/ to select “INPUT1”.
Manual Adjust
Search
System
Programme Entry
Colour System
Store
Label
Child Lock
Decoder
42. 75MHz
B/G
Auto
ABCCC
1
Yes
Block
INPUT1
3 Press HOME MENU to exit the menu.
• With “Off” (factory default) selected, you cannot
watch any images from the decoder.
Sorting preset TV channels
Use the following procedure to change the sequence of
the preset TV programmes.
1 Press HOME MENU.
2 Press / to select “Setup”, and then press
ENTER.
3 Press / to select “Programme Setup”, and then
press ENTER.
• The password entry screen appears. Enter your
4-digit password using buttons 0 – 9.
4 Press / to select “Sort”, and then press
ENTER.
Sort 1/4
56789 01
01234 02
55555 03
01234 04
56789 05
01234 06
56789 07
01234 08
01234 09
10
11
12
13
14
15
16
17
01234 18
19
20
21
22
23
24
25
56789
01234
56789
01234
56789
01234
56789
56789
01234
55555
01234
56789
01234
56789
01234
• The Sort screen appears.
5
Press / or / to select a channel to be
shifted, and then press ENTER.
6
Press / or / to select a new location, and
then press ENTER.
• Sorting is executed.
7 Press HOME MENU to exit the menu.
• To change a page on the Sort screen in step 6, select
5/∞ on the screen with / to select a page, and
then press ENTER.
• The above procedure transfers and sets only the
shifted channel information to recording equipment
such as a VCR or DVD recorder.