Appendix – Pioneer AVH-X8600BT User Manual

Page 136

Message

Cause

Action

iPod full. Tags not transferred. Memory used for tag information on

the iPod is full.

Sync the iPod with iTunes and clean up the
tagged playlist.

Tag transfer failed. Reconnect
your iPod.

This product

’s tag information can-

not transfer to the iPod.

Check the iPod and try again.

Bluetooth

Message

Cause

Action

Error-10

The power failed for the Bluetooth
module of this product.

Turn the ignition switch to OFF and then to
ON.
If the error message is still displayed after per-
forming the above action, please contact your
dealer or an authorised Pioneer Service Sta-
tion.

MirrorLink

Message

Cause

Action

The application list could not
be read out.

Failed to load the application list.

! Disconnect the cable from the smartphone,
and then connect the smartphone again after
a few seconds.

! Turn the ignition switch to OFF and then to
ON.
If the error message is still displayed after per-
forming the above action, reset the smart-
phone.
If the error message is still displayed after per-
forming the above action, please contact your
dealer or an authorised Pioneer Service Sta-
tion.

There is no supportted appli-
cation on your MirrorLink de-
vice.

No supported applications can be
found.

Install

MirrorLink compliant applications to

your

MirrorLink device.

Communication error oc-
curred.

There was a communication error.

! Disconnect the cable from the smartphone,
and then connect the smartphone again after
a few seconds.

Launching the application
failed.

Failed to launch the application.

Try again.

Failed to display the screen of
your device because of irregu-
lar resolution.

The image size is too large.

The size of the images transferred from the
device exceeds 800 × 480.

Engb

136

Appendix