Pioneer AVH-X8600BT - Manual (Page 106)

4 Touch [Time Alignment].
The
“Time Alignment” screen appears.
5 Touch the following keys to select the
listening position if necessary.
Selects the listening position.
! Off:
Changes the listening position setting to
off.
! Front:
Changes the listening position setting to
front.
! Front-L:
Changes the listening position setting to
front left.
! Front-R:
Changes the listening position setting to
front right.
! All:
Changes the listening position setting to
all.
p If you change the listening position setting,
the output levels of all the speakers will
change in conjunction with the setting.
6 Touch the following keys to input the
distance between the selected speaker and
the listening position.
Decreases the distance between the se-
lected speaker and the selected listen-
ing position.
Increases the distance between the se-
lected speaker and the selected listen-
ing position.
p “0.0” cm to “500.0” cm is displayed as the
distance to be corrected is increased or de-
creased.
! Front Left:
Changes the distance between the front left
speaker and the selected listening position.
! Front Right:
Changes the distance between the front
right speaker and the selected listening po-
sition.
! Rear Left:
Changes the distance between the rear left
speaker and the selected listening position.
! Rear Right:
Changes the distance between the rear
right speaker and the selected listening po-
sition.
! Subwoofer:
Changes the distance between the subwoo-
fer speaker and the selected listening posi-
tion.
# If you touch [TA On], the time alignment is
turned off mandatorily.
p This function is available only when the lis-
tening position setting is set to
“Front-L” or
“Front-R”.
# If you touch [Apply Auto EQ], the result of
“A-EQ&TA Measurement” will be applied to the
time alignment setting.
p To use this function, the vehicle’s acoustics
must be measured in advance.
Using the equaliser
The equaliser lets you adjust equalisation to
match the vehicle interior acoustic character-
istics as desired.
Recalling equaliser curves
There are seven stored equaliser curves that
you can easily recall at any time. Here is a list
of the equaliser curves:
Equaliser curve
S.Bass is a curve in which only low-pitched sound is
boosted.
Powerful is a curve in which low- and high-pitched
sounds are boosted.
Engb
106
Chapter
20 Audio adjustments