Pioneer PDP-503HDE - Manual (Page 52)

50
Option
MENU
Colour Sys. [PAL]
PAL
PAL-60
SECAM
NTSC 3.58
NTSC 4.43
AUTO
Useful adjustment settings
AV SELECTION: STANDARD
AV SELECTION: DYNAMIC
AV SELECTION: MOVIE
AV SELECTION: GAME
AV SELECTION: USER
AV SELECTION: STANDARD
AV SELECTION: USER
Mode selection for the INPUT 1 to 4 terminal
Mode selection for the PC terminal
Description
For a highly defined image in a normally
bright room
For a clear-cut image emphasising high
contrast for sports viewing.
For a movie
Lowers image brightness for easier viewing
Allows the user to customise settings as
desired. You can set the mode for each
input source.
Selected item
STANDARD
DYNAMIC
MOVIE
GAME
USER
Colour system setting (AV mode only)
You can change the colour system to one that is
compatible with the image on the screen.
1
Press MENU.
2
Press / to select “Option”, and then press
ENTER.
3
Press / to select “Colour Sys.”, and then press
ENTER.
4
Press / to select a compatible video signal
system of your equipment, and then press ENTER.
5
Press MENU to exit the menu.
A
• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour systems for each channel
are automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• Return to the previous menu by pressing n.
AV selection
AV selection gives you five viewing options to choose
from to best match the Plasma Display System
environment, which can vary due to factors like room-
brightness, type of programme watched or the type of
image input from external equipment.
1
Press AV SELECTION.
• Present AV selection mode displays.
2
Press AV SELECTION again before the mode
displayed on the screen disappears.
• The mode changes as shown left.
ENTER
MENU
AV
SELECTION
/
PDP-503HDE/(E)-e 8/31/02, 5:40 PM 50