Pioneer PDP-503HDE - Manual (Page 50)

48
Useful adjustment settings
Option
MENU
Fine Sync.
Audio Out
RETURN
[Fixed]
Auto Sync.
Auto Sync.
Adjusting the image 32%
Option
MENU
Fine Sync.
H-Pos.
V-Pos.
Clock
Phase
Reset
RETURN
[0]
[0]
[0]
[0]
–90
–60
–90
–20
+90
+60
+90
+20
Fine Sync. adjustment (PC mode only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
1
Press MENU.
2 Press / to select “Option”, and then press
ENTER.
3
Press / to select “Fine Sync.”, and then press
ENTER.
4 Press / to select the specific adjustment item.
5
Press / to adjust the item to your desired
position.
6
Press MENU to exit the menu.
A
• When all adjustments set to factory preset values,
1 Press / to select “Reset”, and then press ENTER.
2 Press / to select “Yes”, and then press ENTER.
• Return to the previous menu by pressing n.
ENTER
MENU
/ / /
Description
Centres the image by moving it to the left or
right.
Centres the image by moving it to the up or
down.
Adjusts the clock frequency.
Adjusts the clock phase.
Selected item
H-Pos.
V-Pos.
Clock
Phase
Auto Sync. adjustment (PC mode only)
For automatically adjusting the computer image.
1
Press MENU.
2 Press / to select “Option”, and then press
ENTER.
3
Press / to select “Auto Sync.”, and then press
ENTER.
• Auto Sync. starts and “Adjusting the image.” displays.
A
• Return to the previous menu by pressing n.
• When Auto Sync. is successful, “Auto Sync completed
successfully” displays. If not, Auto Sync. failed.
• Auto Sync. may fail even if “Auto Sync completed
successfully” displays.
• Auto Sync. may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the
PC image and try again.
• Be sure to connect the computer to the Media Receiver
and switch it on before starting Auto Sync.
PDP-503HDE/(E)-e 8/31/02, 5:40 PM 48