Pioneer PDP-503HDE - Manual (Page 51)

49
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
Useful adjustment settings
Option
MENU
Input Select
INPUT1 [AV]
RGB
AV
Option
MENU
Input Select
INPUT2 [AV]
Y/C
AV
Option
MENU
Input Select
INPUT3 [COMPONENT]
Y/C
RGB
COMPONENT
AV
ENTER
MENU
/
INPUT 1 signal menu
INPUT 2 signal menu
INPUT 3 signal menu
Input selection
Can use for selecting the input source.
1
Press b on the remote control unit or INPUT on
the Plasma Display.
• INPUT SOURCE menu displays.
2
Hold down b on the remote control unit or INPUT
on the Plasma Display to select the input source.
• An image from the selected source automatically
displays.
• You can also select the input source by pressing /
.
A
• When there are no external sources connected to those
terminals, “INPUT3” (COMPONENT) or “INPUT4” will
display in gray and not be selectable.
• Return to the previous menu by pressing n.
Input signal source
Input signal setting
For setting the signal type of external equipment.
1
Press MENU.
2
Press / to select “Option”, and then press
ENTER.
3
Press / to select “Input Select”, and then press
ENTER.
4
Press / to select an input source you want to
set, and then press ENTER.
5
Press / to select a signal type, and then press
ENTER.
• If the selected signal type is incorrect, an image does
not display or no colour image displays.
6
Press MENU to exit the menu.
A
• Return to the previous menu by pressing n.
• The System automatically sets input signals from “INPUT4”
and “PC”.
• If no (colour) image displays, try to change the signal
type.
• Check the operation manual of the external equipment
for the signal type.
PDP-503HDE/(E)-e 8/31/02, 5:40 PM 49