Pioneer PDP-503HDE - Manual (Page 49)

47
Option
MENU
Position
H-Pos.
V-Pos.
Reset
RETURN
[0]
[0]
–15
–60
+15
+60
Useful adjustment settings
ENTER
MENU
/ / /
Description
Centres the image by moving it to the left or
right.
Centres the image by moving it up or down.
Selected item
H-Pos.
V-Pos.
Image position (AV mode only)
For adjusting a picture’s horizontal and vertical
position.
1 Press MENU.
2
Press / to select “Option”, and then press
ENTER.
3
Press / to select “Position”, and then press
ENTER.
4
Press / to select “H-Pos.” or “V-Pos.”.
5
Press / to adjust the item to your desired
position.
6
Press MENU to exit the menu.
A
• For resetting all adjustment items set to the factory preset
values,
1 Press / to select “Reset”, and then press ENTER.
2 Press / to select “Yes”, and then press ENTER.
• Return to the previous menu by pressing n.
• Adjustments are stored separately according to input
source.
• Image position returns to the factory preset value when
“H-Pos.” or “V-Pos.” value is adjusted. (See page 22.)
Noise reduction (NR) (AV mode only)
The noise of the picture can be reduced by the NR
function.
1
Press MENU.
2
Press / to select “Option”, and then press
ENTER.
3
Press / to select “NR”, and then press ENTER.
4
Press / to select the desired level, and then
press ENTER.
5 Press MENU to exit the menu.
A
• Return to the previous menu by pressing n.
• The NR setting functions during 480i, 580i, and 480p input.
It cannot be selected during 1080i and 720p input.
• The NR setting is recorded for each INPUT SOURCE (TV,
INPUT1 to 4).
Option
MENU
NR [High]
High
Low
Off
PDP-503HDE/(E)-e 8/31/02, 5:40 PM 47