Pioneer AVIC-HD1BT - Manual (Page 71)

69
Ch
ap
te
r
8
U
sin
g Ha
n
d
s-
free P
h
o
n
in
g
NA
V
I
Operating from your mobile phone
1
Activate the Bluetooth wireless technol-
ogy on your mobile phone.
For some mobile phone no specific action is
necessary in activation for Bluetooth wireless
technology. For details, refer to the instruction
manual of your mobile phone.
2
Touch [Info/Phone] in the navigation
menu, and then touch [Phone Menu].
3
Touch [Phone Settings].
The phone settings screen appears.
4
Touch [Registration].
5
Touch [Mobile].
The navigation system waits for a Bluetooth
wireless technology connection.
6
Operate your mobile phone to register the
navigation system.
If your mobile phone asks you to enter a pass-
word, enter the password of the navigation
system.
After the registration is completed, the follow-
ing screen appears.
❒ If registration fails repeat the procedure
from the beginning.
Connecting a registered mobile phone
The navigation system automatically connects
the mobile phone selected as a target of connec-
tion. However, connect the mobile phone manu-
ally in the following cases:
• Two or more mobile phones are registered, and
you want to manually select the mobile phone
to be used.
• You want to reconnect a disconnected mobile
phone.
• Connection cannot be established automati-
cally for some reason.
❒ Unregistered mobile phones cannot be con-
nected.
1
Activate the Bluetooth wireless
technology on your mobile phone.
For some mobile phone no specific action is
necessary in activation for Bluetooth wireless
technology. For details, refer to the instruction
manual of your mobile phone.
2
Touch [Info/Phone] in the navigation
menu, and then touch [Phone Menu].
3
Touch [Phone Settings].
The phone settings screen appears.
4
Touch [Connection].
5
Touch a mobile phone name you want to
connect.
When a connection is successfully estab-
lished, a connection complete message
appears, and the system returns to the phone
menu screen.
❒
To cancel the connection to your mobile
phone, touch [Cancel].
❒ If connection fails, check whether your
mobile phone is waiting for a connection,
and then repeat the procedure from step 4.
Editing the device name
You can change the device name to be displayed
on your mobile phone. (Default is [PIONEER
NAVI].)
Phone name currently connected or
selected as a target of connection
MAN-HD1BT-SOFTW-EN.book Page 69 Thursday, April 20, 2006 3:47 PM