Pioneer AVIC-HD1BT - Manual (Page 139)

137
AV
Ch
ap
te
r
14
Cu
st
om
isin
g t
h
e A
u
d
io
S
et
tin
g re
la
te
d
wi
th
A
u
d
io
V
is
u
al
❒ When a Pioneer external unit is connected
with an IP-BUS cable, select [EXT]. When
the audio source is [EXT], the “Video
image” of the Pioneer external unit can be
displayed.
Switching the auxiliary setting
It is possible to use auxiliary equipment with navi-
gation system as the one of source. Activate the
auxiliary setting when using auxiliary equipment
connected to the navigation system.
1
Touch [AUX Input] in the System Set-
tings menu.
Touching [AUX Input] switches between
[On] and [Off].
➲
“Selecting [AUX] as the source” ➞
Page 127
Switching the muting/attenua-
tion timing
You can select the audio source volume is muted
or attenuated what signal is output. This setting
is invalid for the mute signal has been received
from the CELLULAR MUTE lead connected to the
navigation unit. (Even if this setting is [Off], the
navigation system will mute or attenuate the
audio source volume, when the signal via CELLU-
LAR MUTE lead is output.)
1
Touch [Mute Set] in the System Settings
menu.
Each touch of [Mute Set] changes the set-
tings as follows:
• Guide/Tel/VR – The volume is muted or
attenuated by the following condition
– When the navigation outputs the guidance
voice.
– When you use a mobile phone via Bluetooth
technology (dialling, talking, incoming call).
– When the voice recognition mode is acti-
vated.
• Tel/VR – The volume is muted or attenu-
ated by the following condition
– When you use a mobile phone via Bluetooth
technology (dialling, talking, incoming call).
– When the voice recognition mode is acti-
vated.
• Off – The Volume does not change
❒ Operation returns to normal when the cor-
respond action is ended.
❒ Even when navigation voice guidance itself
cannot be attenuated or muted. If you want
to mute the navigation guidance voice
temporarily, use
on the navigation map
screen.
Switching the muting/attenua-
tion level
You can select the muting/attenuation level of
[Mute Set]. This setting is also effected for the
mute signal has been received from the CELLU-
LAR MUTE lead connected to the navigation unit.
❒ This menu is not available in the following
cases:
– Audio source is [OFF]
– During muting/attenuation
1
Touch [Mute Level] in the System Set-
tings menu.
Each touch of [Mute Level] changes the set-
tings as follows:
• All – The volume becomes 0
• –20dB – The volume becomes 1/10
• –10dB – The volume becomes 1/3
❒
When you select [All], [Mute] is displayed
and no audio adjustments are possible
during the sound is turned off.
❒ When you select [–20dB] or [–10dB], no
audio adjustments, except volume control,
are possible during the sound is attenu-
ated.
❒ Operation returns to normal when the cor-
respond action is ended.
❒ Even when a mute signal has been
received from the CELLULAR MUTE lead
connected to the navigation unit, naviga-
tion voice guidance cannot be attenuated
or muted. If you want to mute the naviga-
tion guidance voice temporarily, use
on
the navigation map screen.
MAN-HD1BT-SOFTW-EN.book Page 137 Thursday, April 20, 2006 3:47 PM