Pioneer AVIC-HD1BT - Manual (Page 104)

102
Ch
ap
te
r
10
U
si
n
g
t
h
e AV
S
ou
rc
e (B
ui
lt
-i
n DV
D
Dri
ve a
n
d
R
ad
io
)
AV
Operating the Radio (AM)
You can listen to the radio by using the navigation
system. This section describes operations for
Radio (AM).
Selecting [AM] as the source
1
Touch the source icon and touch [AM].
➲
For details, refer to “Selecting a source” ➞
Page 85
Screen configuration
Radio (AM)
(1) Source icon
Shows which source has been selected.
(2) Preset number indicator
Shows what preset has been selected.
(3) Frequency indicator
Shows to which frequency the tuner is tuned.
(4) Preset list display
Shows the preset list.
(5) LOCAL indicator
Shows when local seek tuning is on.
(6) LW/MW indicator
Shows whether the tuner is tuned for the LW or
MW.
Touch key operation
1
Touch the source icon and then touch
[AM] to select the radio (AM).
When the source icon is not displayed, you
can display it by touching the screen.
Touch keys
(1) Selecting a desired frequency from the
list
Touch to recall the preset frequency.
❒ To register the frequency currently being
received to the preset list, touch and hold the
preset list.
Touch and hold: Storing broadcast stations
You can register the frequency currently being
received to the preset list. You can easily store up
to six broadcast frequencies for later recall with
the touch of a key.
❒ Touch to recall the preset frequency.
❒ Up to 6 stations can be stored in memory.
(2) Touch: Perform manual tuning
To perform manual tuning, touch or
briefly. The frequencies move up or
down step by step.
❒ You can also perform manual tuning by press-
ing the TRK (4/6) button.
Touch and hold: Perform seek tuning
To perform seek tuning, keep touching
or for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is found.
❒ You can cancel seek tuning by touching either
or briefly.
❒ If you keep touching or , you
can skip broadcasting channels. Seek tuning
starts as soon as you release the keys.
❒ You can also perform seek tuning by keep
pressing the TRK (4/6) button.
(1) (2) (3) (5)
(4)
(6)
(4)
(2)
(1) (3)
MAN-HD1BT-SOFTW-EN.book Page 102 Thursday, April 20, 2006 3:47 PM