Troubleshooting – Brother PT-9400 User Manual

Page 77

TROUBLESHOOTING

Problem

Solution

(1) The display stays blank after you have

turned on the machine, or abnormal char-
acters are displayed.

●

Check that the power supply cord is con-
nected.

●

Reset the machine by turning it off, and

while holding down

and

, turn-

ing the machine back on.

☞

The text and formats in the display and
all text files stored in the memory are
erased.

(2) The text shown in the display cannot be

read.

●

Use the Zoom mode to zoom in on the
text. Refer to page 21.

(3) The machine does not print or the printed

characters are blurred.

●

Check that the tape cassette has been
inserted properly.

●

If the tape cassette is empty, replace it
with a new one.

●

Make sure that the tape compartment
cover has been closed.

(4) The text is printed on striped tape.

●

You have reached the end of the tape in
the cassette. Replace it with a new one.

Code