Performing basic operations, P. 14, Code ( ) – Brother PT-9400 User Manual
Page 21: Enter ( ), Cancel ( ), Cursor keys
14
Ch. 3 Functions
Fu
nc
ti
o
n
s
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Performing basic operations
Although most functions can be used just by
pressing their keys, the following keys may be
needed with certain functions.
Code (
)
To use a function printed in yellow on a key,
hold down
while pressing the key for the
function that you wish to use.
Enter (
)
To select a function from a menu or an item
from a list, or to apply the selected setting, press
.
Cancel (
)
To quit a function without applying any changes
that you may have made, press
.
Cursor keys
The four cursor keys (
,
,
, and
)
can be used to perform two operations: to move
the cursor, which appears as either a bracket ([)
or an underline (_), or to make a selection.
(right)
●
To move the cursor one space or character
to the right, press
once. If the cursor is
at the end of a line when this key is pressed,
the cursor moves to the beginning of the
next line.
●
To move the cursor to the end of the current
line of text, hold down
and press
.
●
To move the cursor to the beginning of the
next text block, hold down
and
press .
●
To select the item on the right in a list, press
.
(left)
●
To move the cursor one space or character
to the left, press
once. If the cursor is at
the beginning of a line when this key is
pressed, the cursor moves to the end of the
previous line.
●
To move the cursor to the beginning of the
current line of text, hold down
and
press .
●
To move the cursor to the beginning of the
current text block, hold down
and
press
. If the cursor is already at the
beginning of a text block when these keys
are pressed, the cursor moves to the begin-
ning of the previous block.
●
To select the item on the left in a list, press
.
(up)
●
To move the cursor to the character in the
line directly above the cursor’s current posi-
tion, press
once.
●
To move the cursor to the beginning of the
entire text, hold down
and press
.
●
To select the item above in a menu or list,
press .
(down)
●
To move the cursor to the character in the
line directly below the cursor’s position,
press
once.
●
To move the cursor to the end of the entire
text, hold down
and press
.
●
To select the item below in a menu or list,
press .
Code
Code
New Block
New Block
Cancel
Cancel
Code
Shift
Code
Shift
Code
Code