Brother PT-9400 - Manual (Page 36)

29
Ch. 3 Functions
Fu
nc
ti
on
s
Italic ( )
The Italic function can be combined with each
of the other text format settings to provide an
even larger variety of text styles. When the Italic
function is turned on for the text at the cursor’s
current position, the Italic indicator at the bot-
tom of the display lights up.
To change the Italic setting before entering the
text:
1 Press , , , or until the cursor
is moved to the point where you want to
begin using a different Italic setting.
2 Press to select either ON or OFF. The
current setting is shown below ITALIC at
the top of the display and a sample (
A ) can
be seen to the right of the cursor.
3 Type in the new text.
To change the Italic setting for the text in a
selected area:
1 Hold down and press to select all
of the text, or press and use , ,
, or to select only a part of it.
2 Press until the text is displayed with the
desired Italic setting. The current setting is
shown below ITALIC at the top of the dis-
play.
3 Press . The selected text is displayed
with the desired Italic setting.
NOTE
While selecting an Italic setting, the following
operations may be used:
☞ To select the default setting (OFF), hold down
and press .
☞ To return all text formatting functions to their
default settings, hold down and press
(space bar).
☞ To return to the text without making any
changes, press .
Italic
Shift Italic
Code
Cancel
MARGIN:WIDE AUTO
0.0" HELSI
Style Italic Vertical
Caps Alt Template Zoom
Back-
ground
Half
Cutter
36mm
24mm
18mm
12mm
9mm
6mm
1 1/2"
1"
3/4"
1/2"
3/8"
1/4"
A
Italic
A
ON
ITALIC
Style Italic Vertical
Caps Alt Template Zoom
Back-
ground
Half
Cutter
36mm
24mm
18mm
12mm
9mm
6mm
1 1/2"
1"
3/4"
1/2"
3/8"
1/4"
A
Code Area
All
Area
All
Italic
ON
ITALIC
e r t B e c k e r
T r a n s p o r t
Style Italic Vertical
Caps Alt Template Zoom
Back-
ground
Half
Cutter
36mm
24mm
18mm
12mm
9mm
6mm
1 1/2"
1"
3/4"
1/2"
3/8"
1/4"
A
New Block