Olympus E-300 - Manual (Page 60)

4
V
arious shooting functions
60
Flash intensity control
This adjusts the amount of light emitted by the flash.
In some situations (e.g., when shooting small subjects, distant backgrounds, etc.),
you may get better results by adjusting light emission. It is useful when you intend
to increase the contrast (distinction between light and dark) of images to make the
images more vivid.
1
Menu T T
~
“How to use the menus” (P. 25)
2
Press .
● The setting screen is displayed.
3
To increase light emission:
Each time you press
, light
emission increases in steps of 1/3EV.
To decrease light emission:
Each time you press
, light emission
decreases in steps of 1/3EV.
● You can select EV steps from 1/3EV, 1/2EV
or 1EV. ~ “EV STEP” (P. 124)
4
Press the OK button.
● This does not work when the flash control mode on the electronic flash is set
to MANUAL.
● If light emission is adjusted on the electronic flash, it will be combined with
the camera’s light emission setting.
● Flash intensity control is applicable to the flash you are using (built-in flash
or external flash). When using both flashes simultaneously, flash intensity
control is applicable to the amount of light emitted by both flashes.
Note
OK button
P A S M Available modes
Flash shooting
04E-300EN-P53 04.10.22 11:22 AM Page 60