Olympus E-300 - Manual (Page 132)

132
8
Customizing the settings/functions of y
our camera
After a specified period of time elapses with no operations being performed, the
camera enters the sleep mode (stand-by) to save battery power. SLEEP lets you
select sleep timer. OFF cancels the sleep mode.
The camera activates again as soon as you touch any button (the shutter button,
arrow pad etc.)
SLEEP
1
Menu T T SLEEP T OFF, 1min,
3min, 5min, 10min
~ “How to use the menus” (P. 25)
2
Press the OK button.
2
P A S M SCENE
Available modes
MENU
OK button
PC MODE
You can connect the camera directly to a computer or printer with the provided
USB cable. If you specify the device you are connecting to beforehand, you can
skip the USB connection setting procedure normally required every time you
connect the cable to the camera. For details on how to connect the camera to
either device, refer to Chapter 9 “Printing” (
~ P. 137) and Chapter 10
“Connecting the camera to a computer” ( ~ P. 163).
AUTO : You are required to select PC or PRINT in the USB connection menu
every time you connect the cable to a computer or printer.
STORAGE : Allows USB connection to a PC and transfer of data to the PC. Also,
select to use the OLYMPUS master software via PC connection.
CONTROL : Allows you to control the camera from a PC using the optional
OLYMPUS Studio.
PRINT : Allows you to connect the camera to a PictBridge-compatible printer.
Pictures can be printed directly without using a PC.
~
“Connecting
the camera to a printer” (P. 147)
08E-300EN-P123 04.10.22 11:32 AM Page 132